MarkedetUdforskPrøv
Priser
Log indStart
DesignguidenBevægelse
Bevægelse

Audiogram design: turn audio into a clip people watch

A voice clip is invisible in a feed until it has a frame. Here is how to design an audiogram so the line, the waveform and the show's ground all read on a phone.

GradientlyVerificeret Gradiently-konto·21. oktober 2026·7 min. læsning
Forside: Peony Globe · GR·2NFB·W8

Denne guide findes ikke på dit sprog endnu, så her er den på engelsk.

Kort fortalt

  • An audiogram is a short video of a podcast or voice clip, with the words on screen, a waveform and the show's ground.
  • Design it at 1080×1920 first, then reframe the same clip to 1080×1080 and to 1920×1080.
  • The waveform is a short row of bars in the show's colours. It signals audio. It does not have to twitch with every syllable.
  • Captions sit in the lower middle, one short line at a time, so the clip still works with the sound off.
  • Record or import the voice, time the captions on a timeline, and export MP4 or WebM on the same ground for every episode.
På denne side
The parts of an audiogramAudiogram sizes that survive the appsA waveform that reads as the showCaptions that work with the sound offHow to make an audiogram

An audiogram is a short video of a podcast or voice clip: the voice, a waveform, the words on screen, and a ground that looks like the show. People can follow it with the sound off and recognise the show before reading the title. Cut one moment, frame it at 1080×1920, and export.

The parts of an audiogram

Four things sit on the frame, in this order. Weak clips reverse it and lead with a giant waveform that says nothing.

  • The line. One idea, the largest type on the frame.
  • The names. Show and guest, small, always in the same place.
  • The waveform. A short bar row in the show's colours, not the headline.
  • The ground. One moving background for the whole series.
Episode 12, Amira Cole
Quiet episodes travel further
The Night Desk, out now
Gradiently · @gradiently

Vertical audiogram: guest and episode above, the line large, bars and captions in the middle, off the edges the apps cover.

Amira Cole
Quiet episodes travel further
The Night Desk, episode 12
Gradiently · @gradiently

The same episode as a square. The spoken line stays the largest type, so a feed crop still says something.

Episode 12 of The Night Desk is the example. Amira Cole's line is "Quiet episodes travel further." Names sit high, the line in the upper middle, bars on the centre, captions below. The square keeps the line and the bars. The rest of that episode kit is in podcast social media.

Audiogram sizes that survive the apps

Three frames cover almost every place a podcast clip is posted. Build the vertical one first. The others are rearrangements of it, not a stretched copy.

Reel, Short, TikTok, Story

1080 × 1920

Square feed

1080 × 1080

YouTube and your site

1920 × 1080

Vertical 1080×1920, square 1080×1080, landscape 1920×1080. Export each at its own pixel size.

1080×1920 fits Reels, Stories, TikTok, YouTube Shorts, Snapchat and WhatsApp Status. Keep the line, the bars and the captions in the centre, away from the top, the bottom and the right edge. Social media safe zones maps those edges, and social video sizes lists every frame.

1080×1080 fits a square feed. For more height on Instagram, Facebook, Threads, X or LinkedIn, use 1080×1350. Use 1920×1080 for YouTube and your episode page, with the names and the line side by side. Do not crop the vertical file to make the wide one.

A Canvas is not an audiogram

A Spotify Canvas is a silent loop of 3 to 8 seconds, and Spotify asks for footage without talking. A talking clip will not stay in sync. Keep the audiogram for social, and see Spotify Canvas size for the loop behind a track.

The landscape file on your episode page

On your own site, offer both files. Put WebM first when it is smaller, and MP4 as the fallback. The poster is a still of the same frame. Send MP4 to the social apps. MP4 vs WebM explains the choice.

html
<video controls width="1920" height="1080" poster="night-desk-12.jpg">
  <source src="night-desk-12.webm" type="video/webm">
  <source src="night-desk-12.mp4" type="video/mp4">
</video>
Landscape audiogram on the episode page: WebM first, MP4 as the fallback, poster from the same design.

A waveform that reads as the show

The waveform means press play. It is not a trace of the audio file. A hairline oscilloscope turns to mud on a phone, so use a short row of thick bars in two cover colours, one quiet and one for the peaks. Podcast cover art is where those colours are set.

Avoid

  • Full-frame waveform, no words
  • A new ground every episode
  • Bars covering the captions
  • Episode number as the biggest type
  • Colours the cover never uses

Do

  • Spoken line as the largest type
  • Same ground and the same bar row
  • A gap between bars and captions
  • Names small, in a fixed place
  • Two colours from the cover

Draw about twelve to twenty bars, a few tall and most short, in one band at the centre. Leave room below for captions and reuse the band every episode. The bars can stay still. The words are what stay in time with the voice.

Let the Mark's motion loop for the whole clip, so the frame moves without a second video behind the type. One Mark for the series. Only the line, the guest and the episode number change.

Captions that work with the sound off

Many people watch a feed with the sound off, so the caption is the episode. Burn the words in as open captions and the type survives a repost. Keep a separate track for a long YouTube cut. Video captions covers contrast and line length.

Words on a line

Set it to

3 to 6

Why

One glance on a phone
Lines at once

Set it to

One, or two at a pause

Why

A third line is a paragraph
PositionLower middle

Why

Clears the buttons and the name
ColourInk that clears the ground

Why

A box hides the Mark
TimingChange on a pause

Why

Do not cut a word in half
KindOpen, burned in

Why

A repost keeps your type
SettingSet it toWhy
Words on a line3 to 6One glance on a phone
Lines at onceOne, or two at a pauseA third line is a paragraph
PositionLower middleClears the buttons and the name
ColourInk that clears the groundA box hides the Mark
TimingChange on a pauseDo not cut a word in half
KindOpen, burned inA repost keeps your type
Caption settings for a podcast audiogram. One spot for the whole clip.

Start the caption with the phrase and end it on the pause. Do not split a word. A second line is only for the beat that will not fit. Check the guest's name. Use ink that clears the ground, not a box behind the type.

If the clip still makes sense with the sound off, the audiogram is finished.

Watch it with the sound off

Play the clip once with the sound off before you export. If you lose the thread, the line is too long, too low, or late.

How to make an audiogram

Work in this order. One speaker, one idea, short enough that a stranger will watch it. Under a minute is the length that usually holds in a feed.

  1. 1

    Cut one moment

    Pick the sentence you would quote in the show notes. Drop the warmup and the sign-off.

  2. 2

    Set the vertical frame

    Start at 1080×1920. Keep the show name, the line and the bars in the centre, clear of the top, the bottom and the right edge.

  3. 3

    Lay the ground

    Use one Mark for the series and let its motion loop for the whole clip. The calmest part of the ground sits behind the line.

  4. 4

    Draw the bar row

    Add the bar row in one band above the captions, in the cover colours. Save it. The next episode reuses it.

  5. 5

    Add the voice

    In Gradiently, open the timeline, choose Record, then Voice. Listen back before you add it: the clip stays in the browser until you do. Or import MP3, M4A, WAV or Ogg. Recording voice covers the sources.

  6. 6

    Time the captions

    One short line per phrase, changing on a pause. Type them, or import an SRT or WebVTT file, then watch with the sound off. Adding captions on the timeline is that pass.

  7. 7

    Export, then reframe

    Export MP4 at 1080×1920 and 30 fps. Use WebM on your own site. Then export 1080×1080 and, if you need it, 1920×1080. Check the square still holds the line. Timeline editing covers the cut.

You can design on any unclaimed Mark. Export needs a Mark you have claimed. Timeline, captions, voice recording and video export are part of Pro. One extra size is free. Resizing every size in one step is part of Pro, which is how the square and the landscape come off the vertical master. Gradiently redraws the Mark for each size, motion included, so the calm area stays behind the words. Only add music you have the rights to, and keep it under the voice.

Design med en levende gradient

Opslag, stories, slides og bannere i alle størrelser, med tekst der altid kan læses.

Begynd at designe, gratis

Spørgsmål, folk stiller

What is an audiogram?

A short video of a voice clip: words on screen, a waveform, and a ground that looks like the show, so the moment works in a feed with the sound off.

What size should a podcast audiogram be?

Start at 1080×1920 for Reels, Stories, TikTok and Shorts. Also export 1080×1080 for a square feed and 1920×1080 for YouTube or your site.

Does the waveform have to move with the voice?

No. A fixed row of bars in the show's colours is enough. Captions stay in time with the voice, and the ground carries the motion.

Where should captions sit on a vertical audiogram?

In the lower middle of the 1080×1920 frame, clear of the bottom and the right edge. Keep that spot for the whole clip.

Can I make an audiogram with voice only, and no camera?

Yes. Record voice or import audio, and design the frame around it. A face is optional.

Which file should I export?

MP4 at 1080×1920 and 30 fps for social apps, plus WebM if it also plays on your site. Export the square and the landscape as their own files.

Del denne guide

Skrevet af GradientlyVerificeret Gradiently-konto

Holdet bag Gradiently, et designværktøj bygget om Marks: levende gradienter, der får alt, du designer, til at ligne dig.

Se vores profil

På denne side

The parts of an audiogramAudiogram sizes that survive the appsA waveform that reads as the showCaptions that work with the sound offHow to make an audiogram

Del denne guide

Næste om Bevægelse

Animeret gradientbaggrund til video og sociale medier

Læs videre

Alle guides om Bevægelse
Anvendelser

Podcast på sociale medier: afsnitsopslag, audiogrammer og citatkort

5 min. læsning

En podcast er svær at dele, fordi lyd ikke kan ses i et feed. Opgaven for sociale medier er at gøre hvert afsnit til noget, folk kan se på et sekund og får lyst til at høre.

Bevægelse

Undertekster til video: stilarter, der er læselige og on brand

6 min. læsning

Meget social video ses uden lyd, og så er underteksterne manuskriptet. Her er, hvordan du sætter dem, så de kan læses med et blik og stadig ligner dig.

Bevægelse

Videoformater til sociale medier på alle platforme

5 min. læsning

Fire formater dækker næsten alle platforme. Lær dem, design til det højeste først, og én video kan bruges overalt uden akavede beskæringer.

Find det look, der kun er dit.

Hver Mark er en levende baggrund med én ejer. Prøv en ledig Mark, og sikr dig din, når det føles rigtigt.

Begynd at designeSe lanceringstilbuddet

Marks tilbage at sikre sig

50af 1.000

950 sikret indtil nuFind din

Tjek et certifikat

Skriv et certifikatnummer eller en Marks kode for at se, hvem der ejer den.

Virker med ChatGPT og Claude

Bed din AI om et design. Den laver det i din Mark, klar til at redigere.

ChatGPTClaude
Sådan forbinder du

Produkt

  • Markedet
  • Udforsk
  • Priser
  • Lanceringspakker
  • Certifikater

Lær

  • Designguiden
  • Hjælpecenter
  • Nyheder

Udviklere

  • Oversigt
  • ChatGPT og Claude
  • API-reference
  • API-nøgler

Virksomhed

  • Om os
  • Kontakt os
  • Log ind

Juridisk

  • Vilkår
  • Privatliv
  • Refusion
  • Mark-beskyttelse
  • Cookies
  • Alle politikker
Bevæg dig hen over bogstaverne. Hvert af dem bærer en ægte Mark.Rør ved et bogstav for at se dets Mark.Ét navn. Ti Marks inden i.
© 2026 Gradiently